SIZING GUIDE (SPRING BAR TIPS) - 20 mm

 

PLEASE BEAR WITH US. THIS IS ACTUALLY VERY SIMPLE AS WELL ... 

 

SPRING BAR TIP SIZES:

 

1) 0.9 mm Tips

- DEFAULT / MOST COMMON - fits 95%+ of modern sports watches such as:

• Omega

• Rolex (5-digit - no holes case)

• Rolex (5-digit - drilled lugs - Will work fine, but if your OEM flange-less spring bars have the larger 1.2 mm tips, you can also choose our 1.1 mm tipped spring bars.)

• Tudor

• IWC

• JLC

• Sinn

• Etc.

 

---------------------------------

 

2) 1.1 mm Tips

- These spring bars with larger 1.1 mm tips will provide a solid fit for:

• Rolex (6-digit)

• Rolex (5-digit - drilled lugs - Will work fine with 0.9 mm tips, but if your OEM flange-less spring bars have the larger 1.2 mm tips, you can also choose our 1.1 mm tipped spring bars.)

• Seiko Prospex (SLAxxx)

• Etc.

 

PLEASE NOTE:

- Rolex OEM spring bars (6-digit) will also work with the AMB-001 bracelet.

- Rolex OEM 5-digit flange-less spring bars for drilled lugs may be too thick to fit through the AMB-001 end tubes, which accept 1.8 mm thick spring bars, max. You. can use our 1.8 mm thick spring bars with either 0.9 or 1.1 mm tips, as outlined above.

- Rolex 5-digit "no holes" references (D/F/M/et al.) use the smaller 0.9 mm tips. Please note, 1.1 mm tips will not fit in the lug holes.

- Seiko Prospex SLAxxx OEM spring bars, aka "fat bars" will not fit through the AMB-001's 1.8 mm end tubes. Our spring bars with 1.1 mm tips are perfect for Seiko Prospex SLAxxx watches.

- Please let us know, for our knowledge, about any other watches that may require larger-than-standard spring bar tips. Thank you.

 

---------------------------------

 

3) 0.8 mm Tips

- These spring bars with smaller 0.8 mm tips will provide an appropriate fit for: 

• Grand Seiko

• Etc.

 

PLEASE NOTE:

- Please let us know, for our knowledge, about any other watches that may require smaller-than-standard spring bar tips. Thank you.

 

---------------------------------

 

FINAL NOTES:

- Please make sure to tell us your watch make and model in the "STEP 3" section above. (Orders placed without watch model info will ship with 0.9 mm spring bars.)

- If you are unsure what size spring bar tips your watch accepts, please choose the default 0.9 mm tips.

- We estimate that over 95% of modern sports watches use the conventional 0.9 mm tip size. 

- Most conventional OEM spring bars will also work with our bracelets as long as the gauge of the spring bars is the industry standard 1.8 mm thickness/gauge or less.

- Even our spring bars are 🇩🇪 Made in Germany.

 

Thank you for your consideration. 🍻